Savin 1232 - Manual (Page 98)

Appendix
94
8
Load the following paper in. Load paper in the tray indicated.
Memory is full.
Cannot scan.
Because of insufficient hard disk space, the
first page could not be scanned. Try one of the
following measures.
• Wait for a while and retry the scan opera-
tion.
• Reduce the scan area.
• Delete unneeded stored files.
Memory is full.
Cannot scan. Only sending stored files is avail-
able.
Note
❒ These messages are shown alternately.
There is not enough free hard disk space. No
more files can be stored. Delete unneeded files.
Memory is full.
Delete the unnecessary stored files.
Note
❒ These messages are shown alternately.
There is not enough free hard disk space. De-
lete unneeded files.
Memory is full. Scanning has been cancelled.
Do you want to store the scanned data?
Note
❒ These messages are shown alternately.
Because there is not enough hard disk capacity
in the machine, the page could only be partial-
ly scanned. Specify whether to use the data or
not.
Memory is full.
Press [Send] to send the current scanned data,
or press [Cancel] to delete.
Because there is not enough free hard disk
space in the machine, the page could only be
partially scanned. Specify whether to use this
data or not.
No destination is programmed for this
number. The short ID number that can be assigned to
each destination is not programmed in the de-
livery server. Assign a correct number to each
destination.
No HDD is available for this function. Cannot
store. Set original and select the TWAIN set-
tings from the PC. Files can be scanned with TWAIN by switch-
ing to the network TWAIN scanner.
No sender is programmed for this number. The short ID number that can be assigned to
each sender is not programmed in the delivery
server. Assign a correct number to each sender.
Output buffer is full. Sending the data has
been cancelled. Please try again later. Too many files are in waiting. Please try again
after they have been delivered.
Scanner is currently in use for another function.
Cannot scan.
Note
❒ These messages are shown alternately.
The machine is currently using the scanner for
another function, such as copying. Retry the
operation after the other function is complet-
ed.
Message Possible Cause and Action