Savin 1232 - Manual (Page 79)

Using E-mail with the Document Server
75
6
Using E-mail with the Document Server
You can use the e-mail delivery with
the document server.
This section explains mainly the oper-
ation for simultaneous e-mail sending
and storage. For more information,
see p.55 “Delivery Procedure”.
Simultaneous E-mail and
Storage
Scanned data is stored in the docu-
ment server at the same time the data
is sent by e-mail.
AAAA
Place the original and adjust the
settings for original size and ori-
entation if required.
Reference
⇒ p.43 “Setting Originals”
BBBB
Make the scan settings.
CCCC
Select the destination.
DDDD
If required, specify the sender
(scan data delivery source) and a
subject.
EEEE
Press [Store File].
The screen for setting storage pa-
rameters for scanned data is dis-
played.
FFFF
Make sure [Send & Store] is select-
ed.
GGGG
Press [File Information] to set file in-
formation.
Reference
For more information, see p.79
“Specifying file information”.
HHHH
Press [OK].
IIII
Press the
{{{{Start}}}} key.
The original is scanned, and the
file is delivered to the destination
and stored in the document server.