Savin 1232 - Manual (Page 70)

Sending Stored Scan Data by E-mail
66
6
Procedure for Sending E-mails
Data is sent after specifying scan set-
tings and destination. If necessary,
you can select a sender and a subject.
AAAA
Press the
{{{{Scanner}}}} key.
BBBB
If user codes are set, enter a user
code (consisting of up to eight
characters) with the number keys,
and then press the
{{{{#}}}} key.
The Scanner Function screen is dis-
played.
Reference
For information about the user
code, see the General settings
Guide.
Note
❒ If the network TWAIN scanner
screen is displayed, press [Can-
cel]
.
CCCC
Make sure that no previous set-
tings remain.
Note
❒ If a previous setting remains,
press the
{{{{Clear Modes}}}} key.
DDDD
Place the original in the machine,
and adjust the settings for origi-
nal size and orientation if re-
quired.
Reference
⇒ p.43 “Setting Originals”
EEEE
If the network delivery scanner
screen appears, switch to the
screen for sending e-mail.
A Press [ ].
The Destination Search/Switch
screen is displayed.
B Press [Switch Destination List].
The Switch Destination screen
is displayed.
C Press [E-mail].
D Press [Exit].
The send e-mail screen is dis-
played.
Reference
⇒ p.25 “Making Scanner Set-
tings”.
ZHFS013N