Sony MV-700HR - Manual (Page 18)

18
Resume playback
You can resume playback from the point
where the playback has been stopped. The
player memorizes the point even after the
power is turned off.
1
During playback, press x to stop.
The player memorizes the point where
playback is stopped.
•DVD/Video CD/Audio CD
“Press Play Key To Continue” appears on
the screen.
2
Press u to start playback.
Playback starts from the point where
playback has been stopped.
•MP3/JPEG
When resume playback is activated,
playback starts from the beginning of the
MP3/JPEG file (track) which you have
stopped playback.
Notes
• When you playback a “Memory Stick”, the
resume function is deactivated. Even if a disc is
being played, the resume function is deactivated
when a “Memory Stick” is inserted in the player.
• To deactivate the resume function, press x again
while playback is stopped. “Press Play Key To
Continue” appears on the screen at this time.
• The resume function will be deactivated when
the disc is ejected.
• For MP3/JPEG, the resume playback will not
function when the unit is turned off.
Searching a chapter/title/track
directly
1
During playbacks, press (SEARCH) to
display search screen.
•DVD
Each time you press (SEARCH), the
search screen changes as follows:
Title and Chapter search display
Title and Time search display
Chapter and Time search display
•Video CD/Audio CD*
Track search display
Time of track search display
Time of disk search display
You can select the displayed items by
pressing < or , button.
2
Press the number buttons to enter the
desired chapter/title/track number.
When “Title” and “Chapter” are displayed
T i t l e 0 1 / 0 1 C h a p t e r / 0 1 - -
When “Title” and “Time” are displayed
T i t l e 0 1 / 0 1 T i m e - : - - : - -
3
Press (ENTER).
* You can use the number buttons on the card
remote commander to select the track.
Note
You cannot set “0.”