Sharp UX-A1000 - Manual (Page 46)

Transfer Function
44
Checking or erasing the transfer message
To check or erase the transfer message, follow Steps 1 and 2 of the above
procedure, and then press to check the message, or to erase
the message.
PLAY
DELETE
Turning the Transfer function on and off
When you go out and wish to use the Transfer function, turn it on as follows:
1
Press once and once.
2
Press once and 4 times.
3
Press .
4
Press to turn on the Transfer
function.
(Press to turn the function off.)
5
Press to return to the date and time display.
FUNCTION
1
2
STOP
TRANSFER FUNC
Display:
T.A.D. SETTING
1=YES, 2=NO
The display briefly shows
your selection, then:
ON TAD FAILURE
all.book Page 44 Wednesday, November 12, 2003 9:50 AM