Recording a new outgoing message, Turning the transfer function on or off, Changing the transfer telephone number – Sharp UX-A1000 User Manual
Page 54
Remote Operations
52
Recording a new outgoing message
1
Press
and
on the telephone.
2
When you hear a short beep, speak into the telephone to record the new
message.
•
The message can be up to 15 seconds long. After 15 seconds (or earlier if
the machine detects silence after you finish speaking), you will hear a beep,
and the new message will be played back.
4
Turning the Transfer function on or off
To turn Transfer on: Press
,
, and
on the telephone.
To turn Transfer off: Press
,
, and
on the telephone.
9
1
9
2
Changing the transfer telephone number
1
Press , ,
and
on
the
telephone.
2
After you hear a short beep, enter the new telephone number. When
finished, press
.
•
To insert a pause between any two digits of the number, press
.
9
0
all.book Page 52 Wednesday, November 12, 2003 9:50 AM