Sharp UX-A1000 - Manual (Page 69)

Sending a Fax by Automatic Dialing
67
3. Sen
d
in
g
Fa
x
e
s
Speed Dialing
Speed Dialing can be used to dial any number that has been stored as a
Speed Dial number.
1
Load the document(s).
•
If desired, press to set
the resolution and/or contrast.
2
Press and then enter the 2-digit Speed Dial number.
•
For example, to enter Speed Dial 19, press .
3
Check the display. If the name or number shown is correct, press
. (If not, press and repeat Step 2.)
•
If the transmission is completed successfully, the machine will beep once.
•
If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 102).
Using a Speed Dial number for a voice call
To use a Speed Dial number for a voice call, lift the handset, press ,
and enter the Speed Dial number.
RESOLUTION/
RECEPTION MODE
SPEED DIAL
1 9
START/
MEMORY
STOP
SPEED DIAL
READY TO SEND
all.book Page 67 Wednesday, November 12, 2003 9:50 AM