Siemens SL42 - Manual (Page 13)

19.3.02 SL42-SL45-ger.fm U35 /SL45i- English, A31008-H4860-A1-3-7619
11 Switch on, off / PIN entry
Switch on
Hold down On/Off/End key to switch
on or off.
Enter PIN
The SIM card can be protected with
a 4-8 digit PIN code.
• Enter your PIN code using the
digit keys (shown as a series of
asterisks, if you make a mistake
press
C ).
• Confirm input.
Press the soft key (see diagram).
When you switch the phone on for the first
time the language of your Service Provider
is loaded for the display prompt (see also
p. 62). This takes a few seconds.
Please enter
your PIN:
****
¥ ¥ ¥ ¥
C OK
F
Logging on to the network will take
a few seconds.
When the name of the Service
Provider appears in the display,
the phone
is in standby mode and
ready for use.
Addressbook
When you switch on the phone for the first
time the Phonebook entries are copied from
the SIM card to the Addressbook. Please do
not interrupt this process and reject all
incoming calls.
SIM card
Whenever you change a SIM card you are
prompted to copy the names and phone
numbers stored there to the
MultiMediaCard™ after you have switched
on the phone. Follow the instructions on the
display.
If you want to copy the data of the SIM Card
to the MultiMediaCard™ later on, you can
use the functions in the SIM memory menu
(see p. 22).
Problems with the SIM card
If “ Please insert your SIM card! “ is
displayed, check for faults, see p. 83.
Wrong PIN?
If the PIN is entered incorrectly three times,
the SIM card is barred, see p. 81.
Activate/Deactivate PIN control,
Change PIN No., see p. 66.