Siemens SL42 - Manual (Page 10)

19.3.02 SL42-SL45-ger.fm U35 /SL45i- English, A31008-H4860-A1-3-7619
8 Battery
Insert battery
• Insert battery at the bottom of the
phone
"
and press inward until it
clicks into place
#
.
• Switch off the phone before you
remove the battery.
• Unlock battery
#
, then remove
"
.
Charge battery
The battery is not fully charged
when delivered, so follow the in-
structions given for each model.
Charger cable
—
Insert the charger cable of the plug-
in power supply directly into the
socket on the phone.
If the battery is totally discharged, no
charge icon is displayed at the beginning of
the charging process.
If this is the case, leave the charger cable
plugged in. The charge icon will appear af-
ter a maximum of 2 hours. The battery is
then automatically charged.
"
#
Compress the connector to remove
the charger cable.
Sync Station
–
• Interconnect the socket and the
Sync Station
"
with the plug-in
power supply.
• Insert the phone into the Sync
Station
# and press downward
until it engages. The contact mes-
sage is displayed (alternatively:
plug in power supply directly to
the phone).
#
"