Siemens 4010 - Manual (Page 83)

79
Gigaset 4010 Comfort, GBR, A31008-G4010-B102-1- anha.fm 11.6.01
Appendix
Maintenance
Simply wipe the base station and handset with a damp cloth or an
antistatic wipe. Never use a dry cloth as this can cause static dis-
charge.
Troubleshooting
If your telephone does not behave the way you want it to, please try
first to help yourself with the following list.
Fault Possible cause Solution
No display Handset not activated Hold down end call key 

for 1 second
Batteries empty Charge or replace the
batteries (page 7)
No reaction to key-
stroke Keypad protection acti-
vated Hold down the
B
key for 1 second
No radio connection to
the base station – E.g.
base station 1 is flash-
ing
Handset outside the
base station range Move closer to the base
station
Handset not registered Register the handset
(page 54)
Base station not activat-
ed Check the connector at
base station (page 6)
Handset that is in the
base station is not
charging Line seized by a second
handset for a long peri-
od Maximum charging
power is only possible
while nobody is mak-
ing calls
Handset does not ring Ringer off Activate the ringer
Hold down the
C
key
External telephone
numbers can not be di-
alled Number barring (mail-
box service) is activated Deactivate number bar-
ring
Telephone number
matches a call barring
number Compare call barring
numbers
Units/call charges are
not displayed Tariff information is
missing Request call charge
pulse transmission
from the telephone
company