Sun Microsystems Sun Fire X4240 User Manual
Page 39
Appendix A
Event Logs and POST Codes
29
3. Select Boot Settings Configuration.
The Boot Settings Configuration screen is displayed.
4. On the Boot Settings Configuration screen, there are several options that you
can enable or disable:
■
Quick Boot –
This option is disabled by default. If you enable this, the BIOS
skips certain tests while booting, such as the extensive memory test. This
decreases the time it takes for the system to boot.
■
Quiet Boot –
This option is disabled by default. If you enable this, the Sun
Microsystems logo is displayed instead of POST codes.
■
Add On ROM Display Mode –
This option is set to Force BIOS by default.
This option has effect only if you have also enabled the Quiet Boot option, but
it controls whether output from the Option ROM is displayed. The two settings
for this option are as follows:
■
Force BIOS –
Remove the Sun logo and display Option ROM output.
■
Keep Current –
Do not remove the Sun logo. The Option ROM output is not
displayed.
Boot
******************************************************************************
**
* Boot Settings Configuration
* Allows BIOS to skip
*
* *************************************************** * certain tests while
*
* Quick Boot
[Disabled]
* booting. This will
*
* Quiet Boot
[Disabled]
* decrease the time
*
* AddOn ROM Display Mode
[Force BIOS]
* needed to boot the
*
* Bootup Num-Lock
[On]
* system.
*
* Wait For 'F1' If Error
[Disabled]
*
*
* Interrupt 19 Capture
[Enabled]
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
* *
Select Screen
*
*
* **
Select Item
*
*
* +-
Change Option
*
*
* F1
General Help
*
*
* F10
Save and Exit
*
*
* ESC
Exit
*
*
*
*
*
*
*
******************************************************************************
**
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.