Sun Microsystems Sun Fire X4240 - Manual (Page 40)

30 Sun Fire X4140, X4240, and X4440 Servers Diagnostics Guide • August 2008
■ Boot Num-Lock – This option is On by default (keyboard Num-Lock is turned
on during boot). If you set this to off, the keyboard Num-Lock is not turned on
during boot.
■ Wait for F1 if Error – This option is disabled by default. If you enable this, the
system will pause if an error is found during POST and will only resume when
you press the F1 key.
■ Interrupt 19 Capture – This option is reserved for future use. Do not change.
■ Default Boot Order – The letters in the brackets represent the boot devices. To
see the letters defined, position your cursor over the field and read the
definition in the right side of the screen.