Timer recording, Press [ ¥ , rec] to select the recording time, Press [vcr plus r – Samsung DVD-R4000 User Manual
Page 24: Press [enter, Press [return, Press [ í , dvd power, Specify a time to stop recording, Using vcr plus r codes to make timer recordings
24
DVD-R4000
T
im
er
re
co
rd
in
g
Timer recording
[RAM] [DVD-R]
This is a simple way of specifying a time to stop recording when
you are in a hurry or before you go to bed.
During recording
Press [¥, REC] to select the recording time.
Each time you press the button:
0:30 "# 1:00 "# 1:30 "# 2:00 "# 3:00
^"" Counter (cancel) !" 4:00 ,""}
For your reference
≥Press [STATUS] to show the time remaining until recording
finishes.
≥This does not work during timer recordings or while using Flexible
Recording (➜ page 15).
≥Recording stops and the set time is cleared if you press [∫].
≥The set time is cleared if you change the recording mode or
channel while recording is paused.
Preparation
≥Ensure the clock (and guide channels for VCR Plusr recording,
➜
page 8) are set correctly.
≥Release protection (cartridge ➜page 11, disc ➜page 34) before
proceeding. [RAM]
Entering VCR Plusi codes is an easy way of programming the unit
for recording. You can find these codes in TV Guides and maga-
zines. You can enter up to 16 programs up to a month in advance.
1
Press
[VCR Plusr].
2
Press the numbered buttons to enter
the VCR Plusr code.
Press [2] to move
back to correct a
digit.
3
Press [ENTER].
Confirm the program and make corrections if necessary
using [3, 4, 2, 1].
≥“Invalid Entry” is displayed when you enter the wrong code.
Reenter the code.
≥To change the recording mode
Press [REC MODE].
≥To enter the title of the program
Press [2, 1] to select “Enter Title” and press [ENTER]
(➜page 27).
Repeat steps 1–3 to program other recordings.
4
Press [RETURN].
The timer recording list disappears and the message “TURN
RECORDER OFF FOR TIMER RECORDING” is shown on the
television.
5
Press [Í, DVD POWER].
Ensure “
” lights on the unit’s display.
Specify a time to stop recording
3, 4, 2, 1
ENTER
Numbered
buttons
e.g.,
Using VCR Plusr codes to make timer
recordings
No.
1:58 SP
VCR Plus
i
Remaining Recording Time
3/26 TUE12:53 PM
Enter PLUS CODE Number by using 0–9 key.
1:58 SP
Remaining Recording Time
3/26 TUE12:53 PM
VCR Plus
i
1 2 1 2 1 2 1
2
SP
5:10 PM
4:20 PM
39
4 / 1 MON
01
MODE
OFF
ON
No CHANNEL
DATE
1:58 SP
TIMER
TIMER
RECORDING
Remaining Recording Time
3/26 TUE12:53 PM
New Timer Program
Enable
CHECK
5:10 PM
4:20 PM
4 / 1 MON
MODE
OFF
ON
CHANNEL
DATE
1:58 SP
SP
39
TIMER
RECORDING
Remaining Recording Time
3/26 TUE12:53 PM
3
4
Enter Title
The current
recording mode
(shown on the
unit’s display) is
automatically
selected.
When you press [ENTER]
Displayed if the
recording can fit
in the remaining
space on the
disc.