Samsung DVD-R4000 - Manual (Page 28)

28
DVD-R4000
Editing
Creating play lists
[RAM]
Specify start and end points to create scenes, then specify the
order in which they are to be played. These scenes are not
recorded separately so this doesn’t use much capacity.
You can create a maximum of 99 play lists and 999 scenes.
Preparation
Release protection (cartridge ➜page 11, disc ➜page 34) before
proceeding.
1
While stopped
Press [PLAY LIST].
2
Press [3, 4] to select “–– ––/––” and
press [ENTER].
3
Press [ENTER] at the start point.
≥Use [6], [5] and slow-motion (➜page 18) to find the
start and end points.
≥Pressing [:], [9] allows you to select other programs.
4
Press [ENTER] at the end point.
To specify another scene
Select “Next” and press [ENTER], then repeat steps 3 and 4.
5
Press [3, 4] to select “Exit” and
press [ENTER].
The play list screen appears.
To clear the play list screen
Press [PLAY LIST].
To stop partway through
Press [RETURN].
For your reference
≥You cannot specify an end point before a start point.
≥You may not be able to specify points within 3 seconds of each
other.
≥Play pauses if the end of the last program on the disc is reached
during this procedure.
≥Depending on the state of recording, the actual number of play
lists that can be recorded may be less than that specified in this
manual.
Numbered
buttons
3, 4, 2, 1
ENTER
PLAY LIST
- - - - - -
Auto action
USJ
01 10/23 006
006 0:03
02 10/26 0:07
03 10/21
004 0:06
Dinosaur 3
3
1
1
1
1
1
1
- - - - - - - / - - - - : - -
0 ~ 9
No.
RETURN
ENTER
SELECT
No DATE TOTAL SCENE EDIT TITLE
- - -
- - - - - - - - -
PLAY LIST
Creation
0 : 00 . 05
Start End
3
Start
1
End
Next
Exit
Scene No.
0 : 00 . 05
RETURN
ENTER
SELECT
PLAY LIST No.4
PLAY 01
-- : -- . --
The location of
the start point.
The length of the
whole contents
on the disc.
PLAY LIST
Creation
0 : 00 . 05
Start End
Start
1
End
Next
Exit
Scene No.
0 : 01 . 20
RETURN
ENTER
SELECT
0 : 01 . 20
3 3
PLAY LIST No.4
01
The location of
the end point.