Maintenance, Product service, Troubleshooting guide – Samsung DVD-R4000 User Manual

Page 54

Advertising
background image

Re

fe

re

n

ce

54

DVD-R4000

Troubleshooting guide

Recording and timer recording

Page

The precision parts in this unit are readily affected by the envi-
ronment, especially temperature, humidity, and dust. Cigarette
smoke also can cause malfunction or breakdown.

To clean this unit, wipe with a soft, dry cloth.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, read the instructions that

came with the cloth carefully.

Observe the following points to ensure continued listening and
viewing pleasure.
Dust and dirt may adhere to the unit’s lens over time, making it
impossible to record or play discs.
Use every 1 to 4 months, depending on frequency of use and the
operating environment. Read the lens cleaner’s instructions care-
fully before use.

1. Damage requiring service—The unit should be serviced by

qualified service personnel if:
(a) The AC power supply cord or AC adaptor has been

damaged; or

(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked

change in performance; or

(e) The unit has been dropped or the cabinet damaged.

2. Servicing—Do not attempt to service the unit beyond that

described in these operating instructions. Refer all other servic-
ing to authorized servicing personnel.

3. Replacement parts—When parts need replacing ensure the

servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.

4. Safety check—After repairs or service, ask the servicer to per-

form safety checks to confirm that the unit is in proper working
condition.

For product information or assistance with product operation:

SAMSUNG ELECTRONICS AMERICA, INC. -CONSUMER
ELECTRONICS CUSTOMER SERVICE
400 Valle

y

Road, Suite 201, Mt Arlington, NJ 07856

1-800-SAMSUNG (1-800-726-7864)
www.samsung

usa.com

Cannot record.

≥You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc the

unit can record onto.

≥The disc is unformatted. Format the disc so this unit can record on it.
≥The write-protect tab on the cartridge is set to PROTECT.
≥Some programs have limitations on the number of times they can be recorded (CPRM).
≥The disc is protected with DISC SETTING.
≥The disc is full or nearly full. Erase unneeded programs or use another disc.
≥You cannot record on finalized DVD-R discs.

11

34
11
14
34
32

VCR Plusr programming
does not work properly.

≥The guide channels are incorrect. Go to the Channel menu and correct them with “VCR

Plusi CH Setting”.

≥The clock is wrong. Go to the Set Up menu and correct it with “Clock Settings”.

8

49

Timer recording does not
work properly.

≥The timer program is incorrect. Correct the program.
≥The unit is not on timer recording standby. (“

” on the unit’s display is not on.) Press [Í,

DVD POWER] to turn the unit off and make sure that “

” is on.

≥Different timer program times overlap.
≥The clock is wrong. Go to the Set Up menu and correct it with “Clock Settings”.

26

49

The unit switches to standby
while making a timer record-
ing.

≥The disc has run out of space. Use a disc that has enough space to record the program.

The timer program remains
even after recording finishes.

≥The program remains if you select “DAILY” or “WEEKLY”.

25

Timer recording does not
stop even when [
] is
pressed.

≥Press [∫] and then [ENTER] within 5 seconds to turn “

” off. Recording stops.

The available recording time
doesn’t increase even after
erasing recordings on the
disc.

≥As this unit is unable to erase data written to DVD-RAM with a computer, the available

recording time does not increase. The data will be erased if you reformat the disc.

≥If the disc is dirty, wipe with the DVD-RAM/PD disc cleaner (optional) before formatting.

34

50

A part or whole of a recorded
program has been lost.

≥If there is a power failure or the plug is disconnected from the household AC outlet while

recording or editing, the program may be lost or the disc may become unusable.

We cannot offer any guarantee regarding lost programs or discs. You will have to format

the disc or use a new disc.

34

Discs make sounds as they rotate. This does not indicate a malfunction.

Maintenance

Product Service

Product information

Advertising