Connecting an amplifier or system component, Home theater, Adv an c ed ope ra tion – Samsung DVD-R4000 User Manual

Page 42: Digital connection analog connection

Advertising
background image

Adv

an

c

ed ope

ra

tion

42

DVD-R4000

Home Theater

This model can play Dolby Digital, but only in two channels. This model does not have a DTS decoder. You must connect a unit with a
Dolby Digital or DTS decoder to enjoy surround sound.

Recording to digital recording equipment or cassette tapes

Digital recording
You can record the digital signal directly to digital recording equip-
ment (➜ Connection [A] above).

[Note]

≥With DVD, the following conditions must be met: a the disc

doesn’t have protection preventing digital recording, and b the
recording equipment can handle signals with a sampling fre-
quency of 48 kHz.

≥You cannot record DTS signals.
≥You cannot record MP3.

When recording DVDs, make the following settings.
V.S.S.: OFF (➜page 37)
PCM Down Conversion: On (➜page 47)
Dolby Digital: PCM (➜page 47)
DTS: Off (➜page 47)

Analog recording
You can record to a cassette deck or other recording equipment
(➜ Connection [B] above).
There are no limitations on recording analog signals as there are
with digital signals.

Connecting an amplifier or system component

R-AUDIO-L

VIDEO

OPTICAL

DIGITAL AUDIO OUT

(PCM/BITSTREAM)

OUT

R-AUDIO-L

R-AUDIO-L

VIDEO

VIDEO

S-VIDEO

S-VIDEO

(L3)

(L1)

IN 1

IN 3

S-VIDEO

COMPONENT

VIDEO OUT

(480P/480I)

Y

P

B

P

R

VHF/UHF

RF IN

RF OUT

A

B

OPTICAL

OPTICAL IN

AUX IN

L

R

Digital connection

Analog connection

R - AUDIO - L

To enjoy multi-channel surround
sound
Connect an amplifier with a built-in
decoder or a decoder-amplifier combi-
nation.
≥Change the settings in “Digital Audio

Output” (➜page 47).

[Note]

You cannot use DTS Digital Surround
decoders not suited to DVD.

To enjoy stereo or Dolby Pro Logic
Connect a digital amplifier or system
component.
≥Change the settings in “Digital Audio

Output” (➜page 47).

To enjoy stereo or Dolby Pro Logic
Connect an analog amplifier or system
component.

Speakers (Example)
Connect three or more speakers
for surround sound.

Optical digital audio cable
Do not bend sharply when
connecting.

Insert fully, with this

side facing up.

Amplifier

Amplifier or system
component

Audio cable

This unit

Advertising