Sony STR-DG920 - Manual (Page 24)

24 US
4b: Connecting the video components
This section describes how to connect your
video components to this receiver. Before you
begin, refer to “Component to be connected”
below for the pages which describe how to
connect each component.
After connecting all your components,
proceed to “5: Connecting the antennas
(aerials)” (page 34). The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
Note
Be sure to turn on the receiver when the video and
audio of a playback component are being output to a
TV via the receiver. If the power supply of the
receiver is not turned on, neither video nor audio is
transmitted.
Converting video signals
This receiver is equipped with a function for
up-converting video signals. For details, see
page 31.
How to connect your
components
Component to be connected Page
TV 18
With HDMI jack 25
DVD player 27
Blu-ray disc player 28
Satellite tuner, Set-top box 29
DVD recorder, VCR 30
Camcorder, video game, etc. 30
Video input/output jack to be
connected
COMPONENT VIDEO
Y
P B /
C B
P R /
C R
Digital Analog
High quality image