Sony STR-DG920 - Manual (Page 97)

97 US
O
the
r Op
er
atio
ns
3
Press PRESET + or PRESET –
to select a preset number.
30 FM and 30 AM preset numbers are
available. If “MEM” disappears before
you select the preset number, start again
from step 2.
4
Press ENT/MEM.
If SHIFT indicator is light off before you
press ENT/MEM, press SHIFT.
You can also use MEMORY/ENTER on
the receiver.
The station is stored as the selected preset
number.
If “MEM” disappears before you press
ENT/MEM, start again from step 2.
5
Repeat steps 1 to 4 to preset
another station.
Selecting a preset station
1 Press TUNER repeatedly to select the FM or
AM band.
2 Press PRESET+ or PRESET – repeatedly to
select the preset station you want.
You can also press SHIFT, then press
numeric buttons to select the preset station
you want. Then, press
to enter the
selection.
You can also press TUNING MODE on the
receiver repeatedly to select “PRESET”
then use TUNING +/– to select the preset
stations you want.
For details on XM Radio service, refer to
“Listening to the XM Radio” (page 65) in
“Tuner Operations”.
Aiming the XM Antenna
You can use “XM ANT AIM” in the Tuner
settings menu to help you aim the antenna for
optimal signal reception.
1 Press XM to select “XM RADIO”.
You can also use INPUT SELECTOR on the
receiver.
2 Press AMP.
3 Press MENU.
4 Press V/v repeatedly to select “<TUNER>”.
5 Press or b to enter the menu.
6 Press V/v repeatedly to select “XM ANT
AIM”.
7 Press or b to enter the parameter.
8 While checking the parameter, aim your
antenna to where the best reception will be
received.
For details on the parameter, see “Signal
strength” below.
Signal strength
Listening to the XM Radio
Signal
strength Signal type
Satellite Terrestrial
Good S : 3 T : 3
Marginal S : 2 T : 2
Weak S : 1 T : 1
None S : 0 T : 0
continued