Sony STR-DG920 - Manual (Page 78)

78 US
You can select an operation screen using the
GUI menu, depending on the DIGITAL
MEDIA PORT adapter you want to use. For
some adapter, such as TDM-BT1 or TDM-
NW1, the operation screen is fixed and you
cannot change it on the GUI screen.
1
Press GUI MODE.
“GUI MODE” appears on the display and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press V/v repeatedly to select
“Music”, then press or b.
“DMPORT” appears beside “Music”.
3
Press or b.
The component connected to the
DIGITAL MEDIA PORT adapter is
recognized and “DMPORT” on the TV
screen will change to respective
component’s name.
The category of the component connected
to DIGITAL MEDIA PORT adapter
appears on the TV screen.
4
Press OPTIONS to display
“Function List”.
5
Press V/v to select “DMPORT
Control”.
You can select the following modes in
this menu;
• System GUI
This mode is for the TDM-iP1 and
TDM-NC1. The list of tracks will be
displayed on the GUI screen of the
receiver. You can select a track you
want and play back it on each GUI
screen.
• Adapter GUI
This mode is for the TDM-iP1 and
TDM-NC1. The menu of the adapter
will be displayed on the TV screen.
• iPod
This mode can be selected only when
the TDM-iP1 is connected.
If “DMPORT Control” is not displayed,
see the operating instructions supplied
with the connected component for details
on operating that component.
Selecting an operation screen
to operate the component
connected to the DIGITAL MEDIA
PORT adapter