SATO LM400E - Manual (Page 20)

4
Place the roll label on the label
supply spindle.
Slide the label stopper and
adjust to the label width.
Roll label
Label stopper
Label su
spindle pply
5
Thread the label under the label
guide and pitch sensor.
Make sure that the side of label
touches the guide roller slightly.
Label guide Label
Pitch sensor
Label guide Guide roller
*Thermal head and the
surrounding areas will become
hot during the printing process.
When changing the label
after printing, be careful not to
get burnt.
*Contacting the edge of thermal
head with bare hands may
result in injury.
When changing the labels, be
careful not to get injured.
Caution
10