SATO LM400E - Manual (Page 25)

Setting carbon ribbon
Use only SATO carbon ribbons.
Use of other than approved carbon ribbons may result in unsatisfactory print quality and/or
damage to the print head and may void your warranty.
1
Open the side cover.
Side cover
2
Push up the purple head lock lever in
the direction of an arrow to open the
thermal head.
Thermal head
Head lock
lever
3
Place the carbon ribbon on
the ribbon supply spindle and
push the ribbon roll all the way
to the inside of the printer.
(Confirm winding direction)
Ribbon
supply spindle
Carbon ribbon
15