SATO LM400E - Manual (Page 8)

shock.
When disconnecting the power cord from the printer or a power
outlet, pull on the plug. If not, it may cause exposure of wire,
breaking of wire, overheating, fire or electric shock.
: Replacing fuse
Disconnect the power cord from a power outlet before replacing
the fuse.
: Cover
When opening/closing the cover, be careful not to get your fingers
caught. Hold the cover tightly and stop it from dropping down.
: Thermal head
Thermal head will become hot during the printing process. When
changing carbon ribbon and labels or when cleaning after printing,
be careful not to get burnt.
Contact with the edge of thermal head with bare hands may cause
injury. When changing the carbon ribbon and labels or when
cleaning, be careful not to get injured.
Do not replace the thermal head by yourself. Doing so may result
in injuries, burns or electric shock.
: Opening and closing thermal head
Do not insert foreign material other than carbon ribbon and labels
when opening/closing the thermal head. This may result in injury or
malfunction.
: Setting labels
When setting the roll labels, please be careful not to get your
fingers caught between the label and label supply spindle.
: When unused for long periods of time
Disconnect the power cord from a power outlet when unused for
long periods of time.