Sanyo CLT-E32 - Manual (Page 16)

[ E 1 4 ] G e t t i n g S t a r t e d
GETTING
STARTED
C. Connect the base unit
1) Connect the AC adapter to the DC IN 9V jack and to a
standard 120V AC wall outlet.
2) Set the base on a desk or tabletop, and place the
handset in the base unit.
3) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see that the AC adapter is
plugged in and the handset makes good contact with the base charging
contacts.
UP383BA_0.book Page 14 Thursday, May 26, 2005 10:48 AM