Sanyo CLT-E32 - Manual (Page 80)

[ E 7 8 ] A d d i t i o n a l I n f o r m a t i o n
ADDITIONAL INFORMATION
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom Suggestion
The charge LED won't
illuminate when the
handset is placed in
the cradle.
• Make sure the AC adapter is plugged into the base (or the charger (for multi-
handset packs)) and wall outlet.
• Make sure the handset is properly seated in the cradle.
• Make sure the charging contacts on the handset and the base (or the charger (for
multi-handset packs)) are clean.
The audio sounds weak.
• Move the handset and/or base to a different location away from scratchy metal
objects or appliances and try again.
• Make sure that you are not too far from the base.
Caution
• Use only the specified Sanyo battery pack.
• Do not remove the battery from each handset to charge it.
• Never throw the battery into a fire, disassemble it, or heat it.
• Do not remove or damage the battery casing.
UP383BA_0.book Page 78 Thursday, May 26, 2005 10:48 AM