Sanyo CLT-E32 - Manual (Page 20)

[ E 1 8 ] G e t t i n g S t a r t e d
GETTING
STARTED
6) Align the mounting slots on the base with the mounting posts on the wall. Then push in
and down until the phone is firmly seated.
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly to the wall.
Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that could
cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid excessive
lengths.
• Make sure the wall material is capable of supporting the weight of the base and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the
wall material where the base unit will be placed.
Important:
DO NOT use an AC outlet controlled by a wall switch.
UP383BA_0.book Page 18 Thursday, May 26, 2005 10:48 AM