Sony DVS-V3232B/V3232M - Manual (Page 84)

5-12
ROUTING SWITCHER SYSTEM (E)
5-1. Setting Items of the Primary Station
PHYSICAL NUMBER ASSIGNMENT DVS-V6464B V2.10 STATION NUMBER 1
DESTINATION LEVEL
No. NAME VID A1 A2 4 5 6 7 8
001 OUT001 001-1 001-2 017-3 001-4 001-5 001-6 032-7 ...-.
002 OUT002 002-1 ...-. 018-3 002-4 005-5 002-6 031-7 ...-.
003 OUT003 003-1 003-2 019-3 003-4 011-5 003-6 030-7 ...-.
004 OUT004 004-1 004-2 020-3 004-4 ...-. 004-6 ...-. ...-.
005 OUT005 005-1 005-2 ...-. 005-4 021-5 005-6 028-7 ...-.
006 OUT006 006-1 006-2 ...-. 006-4 026-5 006-6 027-7 ...-.
007 OUT007 007-1 007-2 ...-. ...-. ...-. 007-6 ...-. ...-.
008 OUT008 008-1 008-2 ...-. ...-. 036-5 008-6 025-7 ...-.
009 OUT009 009-1 009-2 ...-. ...-. 041-5 009-6 024-7 ...-.
010 OUT010 001-8 010-2 ...-. ...-. 046-5 010-6 023-7 ...-.
011 OUT011 002-8 011-2 ...-. ...-. 051-5 011-6 022-7 ...-.
012 OUT012 003-8 012-2 ...-. ...-. ...-. 012-6 021-7 ...-.
013 OUT013 004-8 013-2 ...-. ...-. 013-5 013-6 ...-. ...-.
014 OUT014 005-8 014-2 ...-. ...-. 014-5 014-6 ...-. ...-.
015 OUT015 006-8 015-2 ...-. ...-. ...-. 015-6 ...-. ...-.
016 OUT016 007-8 016-2 ...-. ...-. ...-. 016-6 017-7 ...-.
017 OUT017 008-8 ...-. ...-. ...-. 017-5 017-6 016-7 ...-.
018 OUT018 009-8 ...-. ...-. ...-. 018-5 018-6 015-7 ...-.
F1:SEARCH F2:JUMP F3:PgUp F4:PgDn F5:SOURCE Ctrl-P:DELETE Ctrl-E:MENU
..... Destination Number Setting Procedure
Press [F5] to set the destination number setting screen.
Then, perform the same procedure as for source.
Example of Setting Screen
Operating Function Keys
[F1] : SEARCH {To move the cursor to the desired
destination (source) name}
1.
When [F1] is pressed, “Please Input DEST
(SOURCE) NAME =” will be displayed.
2. Input the destination (source) name to be
retrieved.
3. When [Enter] is pressed, the cursor will move
to the desired name.
n
When menu item [J] is set to the Description name
mode, [F1] (SEARCH) will have the following
functions.
1. When [F1] is pressed, “Please Input NAME
=” will be displayed.
2. Enter the Description name (within seven
characters) from the head.
3. When [Enter] is pressed, the Description name
entered will be searched.
4. If the desired name does not exist in the screen,
press [F1] again.
[F2] : JUMP {To move the cursor to the desired destina-
tion (source) number}
1.
When [F2] is pressed, “Please Input DEST
(SOURCE) NUMBER=” will be displayed.
2. Input the destination (source) number to be
retrieved.
3. When [Enter] is pressed, the cursor will move
to the desired number.
[F3] : Pg Up
When [F3] is pressed, the screen will display the 16
lines previous to the 16 lines displayed currently.
[F4] : Pg Dn
When [F4] is pressed, the screen will display the 16
lines next to the 16 lines displayed currently.
[F5] : SOURCE (DEST.)
When [F5] is pressed, the number setting screen
will change between the destination number setting
screen and source number setting screen alternately.
m
1.
The physical number is the input/output number
specified at the menu item [A : SET UNIT LOCA-
TION].
2. The virtual input/output name and the virtual level
name are assigned to the buttons on the remote control
unit.