Sony DVS-V3232B/V3232M - Manual (Page 73)

5-1
ROUTING SWITCHER SYSTEM (E)
Section 5
System Settings
DISPLAY CONTROL AREA DVS-V6464B V2.10 STATION NUMBER 1
SOURCE No 0001-0512 DESTINATION No 0001-0512
Ctrl-E:RETURN TO MENU
5-1. Setting Items of the Primary Station
A : DISPLAY CONTROL AREA
A : DISPLAY UNIT LOCATION
Purpose
The menu items [A : DISPLAY CONTROL AREA] and
[A : DISPLAY UNIT LOCATION] are used to check the
source and destination area of the whole routing system to
be controlled by the primary station.
Checking Procedure
1. Select menu item [A].
2. Control area is displayed as shown below.
Press [Ctrl] _ [E] to return to the menu screen.
The following table lists the control area and setting area
for each model.
Model Control Area Mapping Area
Input control Output control Setting area
area area
DVS-RS1616 1 to 512 1 to 512 1 to 128
DVS-TC3232 1 to 512 1 to 512 1 to 256
BVS-V3232
BVS-A3232
DVS-V1616 1 to 512 1 to 512 1 to 512
DVS-V3232B
DVS-V6464B
DVS-A3232
BKPF-R70
HDS-V3232
n
The control area of the menu item [A] means the control
area of the whole routing system, and not the input/output
area of the primary station.
To set the source/destination location of the primary
station, call the secondary station menu screen by selecting
menu item [R] and type the station number [1], and then
select the menu item [A] of the secondary station.