Slick EDIT V3.3 - Manual (Page 486)

• Enable firewall/proxy - When on, indicates you have a firewall or proxy. You need to turn this on to
add a connection profile that uses a firewall.
• Host name - Host name of firewall.
• Port - Port number of firewall.
• User ID - User ID used when logging into firewall.
• Password - Password used when logging into firewall.
• USER user@site - When this option is selected, host and port are required. User id and password are
ignored. USER @remote_host is sent to the firewall when connecting.
• USER user@site after logon - When this option is selected, host, port, user id, and password are re-
quired. USER remote_userid@remote_host is sent to the firewall after logon.
• OPEN site - When this option is selected, host and port are required. User ID and password are ig-
nored. OPEN remote_host is sent to the firewall when connecting.
• Router - When this option is selected, host, port, user id, and password are ignored. Router based fire-
walls are transparent with the exception that connections can only be established one way (out through
the firewall). Because incoming connections are not allowed, PASV is turned on automatically.
• Passive transfers (PASV) - When this option is selected, transfers are initiated by SlickEdit Core.
FTP Options Dialog
464