Slick EDIT V3.3 - Manual (Page 531)

ISPF Insert Before B
Usage
B [n]
Remarks
Identifies a line before which copied or moved lines are to be inserted n times. You are allowed to specify
multiple A, B, or O line commands to have the same copy or move block inserted in multiple places.
See Also
ispf_copy, ispf_paste, ISPF Line Command B, ISPF Line Command Copy, ISPF Line Command
Move, ISPF Line Command Overlay
ISPF Insert Bounds Ruler BNDS
Usage
BNDS
Remarks
Insert a column boundary ruler line. After this line is inserted, the < and > marks may be moved in order to
adjust the column boundaries. Note that if you have multiple bounds lines, and you change one, the sub-
sequent bounds lines will also be changed.
A column boundary line with one < sign indicates a left boundary and no right boundary (unbounded). A
column boundary with one > sign indicates a single column boundary (left and right bounds are same).
See Also
ispf_bounds, ISPF Line Command Shift, ISPF Line Command Overlay
ISPF Copy Lines C and CC for blocks
Usage
• C [n] - Copy n lines starting with the line with the command.
• CC - Copy a block of lines, must match another CC.
Remarks
Specify lines to be copied to another location. There are two forms to this command. The first form (C [n])
specifies that the line and the subsequent n-1 lines are to be copied. The second (block) form (CC) is
placed on the first and last lines of the block to be copied. There can be only one copy block specified.
Furthermore, you can not have both a move block and a copy block specified at the same time.
See Also
ISPF Line Commands
509