Sony HDS-X5800 User Manual
Page 19
1-11 (E)
HDS-X5800
Removal
Remove them by reversing the installation procedure.
HKS-5811M/5811SD (CI-29 Board)
The HKS-5811M/5811SD consist of the two types of the
boards: EQ board and CI-29 boards. Installation and
removal of the CI-29 board are described below.
For the EQ board, refer to Section 1-6-3.
Installation
1.
Remove the two screws and remove the blank panel.
n
Keep the removed blank panel.
B3
x 4
Blank panel
2.
Insert a pair of CI-29 boards to the CASCADE IN slot
and tighten the two screws (with drop-safe) of the each
board.
m
. Insert the board while applying equal force to the
screws at both ends of the board.
. Check that the boards are securely connected to the
MB-939 board.
. Be careful not to turn them upside down by
observing the top and bottom of these boards when
installing the each board.
Option name
Board name
Installation slot
HKS-5811M
CI-29 board
Connector side, The CASCADE
(2 boards
IN slot of the same position as
as a pair)
in the MX-103 board.
HKS-5811SD
CI-29 board
Connector side, The CASCADE
(2 boards
IN slot of the same position as
as a pair)
in the MX-104 board.
Removal
Remove it by reversing the installation procedure.
CI-29 board
CI-29 board
Screws
(with drop-safe)
Screws
(with drop-safe)
CASCADE IN slot
1-6. Installation of Optional Boards