Sony HDS-X5800 - Manual (Page 63)

2-13 (E)
HDS-X5800
2-6. Data Backup
The table data that are set from the personal computer (to be abbreviated as PC hereafter) are stored in the
RAM on the CPU-339 board. Backing up the stored data is recommended in the case of emergency such
as data are damaged or lost.
Backing up the stored data is performed using the software BZR-20 supplied with the HDS-X5800.
2-6-1. Connection
Connect the equipment as shown below for uploading and downloading the stored data.
Method of connecting each BZR-20 that is shown in the illustration, and the stored data that can be
uploaded and/or downloaded are described below.
BZR-20 Connection Connection method Setup data that can be
uploaded/downloaded
BZR-20-1 REMOTE3 connector RS-232C crossover cable The various setup data of the primary
of the HDS-X5800 and a PC (9-pin to 9-pin) station (HDS-X5800),
the Routing Switchers 1 to 2,
the Remote Panels 1 to 4,
and the BZR-IF310-1 to 2
BZR-20-2 Primary station (BZR-IF310-1) RS-232C crossover cable The various setup data of the Remote
and a PC (9-pin to 9-pin) Panels 5 to 8, and the BZR-IF310-1
BZR-20-3 Primary station (BZR-IF310-2) RS-232C crossover cable The various setup data of the Remote
and a PC (9-pin to 9-pin) Panels 9 to 12, and the BZR-IF310-2
BZR-20-4 DATA connector of the primary Ethernet The various setup data of the primary
station and a PC station (HDS-X5800),
the Routing Switchers 1 to 2,
the Remote Panels 1 to 4,
and the BZR-IF310-1 to 2
2-6. Data Backup