Sony HT-FS3 - Manual (Page 13)

13 GB
Gettin
g
Sta
rted
Connecting a Blu-ray Disc player (recorder), “PlayStation 3,”
DVD player (recorder), satellite/cable television tuner, etc.
Notes on HDMI connections
• Use a High Speed HDMI cable. If you use a Standard HDMI cable, 1080p images may not be
displayed properly.
• Sony recommends that you use an HDMI-authorized cable or Sony HDMI cable.
• Check the setup of the connected component if an image is poor or the sound does not come out of a
component connected via the HDMI cable.
• Audio signals (sampling frequency, bit length, etc.) transmitted from an HDMI jack may be
suppressed by the connected component.
• Sound may be interrupted when the number of channels or sampling frequency of audio output
signals from the playback component is changed.
• When the connected component is not compatible with copyright protection technology (HDCP), the
image and/or the sound from the HDMI TV OUT jack may be distorted or may not be output.
In this case, check the specification of the connected component.
• We do not recommend using an HDMI-DVI conversion cable.
• When TV, DIGITAL 1, DIGITAL 2, FM, AM, or DMPORT is selected, the video signal that was
selected last time is output.
• This system supports “x.v.Colour (x.v.Color)” transmission, extended by HDMI ver1.3.
ANTENNA
AM FM
75 COAXIAL
HDMI TV OUT SAT/CATV IN DVD IN BD IN
EZW-T100
SPEAKER
ONLY FOR SS-FS3
R
L
DMPORT
DC 5V
0.7A MAX
AUDIO IN
R
TV
L
OPTICAL
TV IN
COAXIAL
DIGITAL
DIGITAL 1 IN DIGITAL 2 IN
Blu-ray Disc player (recorder),
“PlayStation 3”
A HDMI cable (not supplied)
A
: Signal flow
Audio/video
signal
DVD player (recorder)
Audio/video
signal
Satellite/cable television tuner
Audio/video
signal
A A
Rear of the
subwoofer