Connecting the antenna (aerial), Connecting the am loop antenna (aerial), Gettin g sta rted – Sony HT-FS3 User Manual
Page 17: Remove only the loop part from the plastic stand, Set up the am loop antenna (aerial), Continued
17
GB
Gettin
g
Sta
rted
Connecting the AM loop antenna (aerial)
The shape and the length of the antenna (aerial) are designed to receive AM signals. Do not dismantle
or roll up the antenna (aerial).
1
Remove only the loop part from the plastic stand.
2
Set up the AM loop antenna (aerial).
3
Connect the cords to the AM antenna (aerial) terminals.
While pushing down the terminal clamp, insert the (*) part of the cords.
The cords can be connected to either terminal.
• Do not place the AM loop antenna (aerial) near the system or other AV component, as noise may
result.
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
4
Make sure the AM loop antenna (aerial) is connected firmly by pulling softly.
Connecting the antenna (aerial)
Note
Tip
HDMI
TV OUT
SAT/CATV IN
DVD IN
BD IN
EZW-T100
PORT
DC 5V
0.7A MAX
AUDIO IN
R
TV
L
OPTICAL
TV IN
COAXIAL
DIGITAL
DIGITAL 1 IN
DIGITAL 2 IN
FM
75 COAXIAL
ANTENNA
AM
*
Rear of the subwoofer
continued