Sony HT-FS3 - Manual (Page 62)

62 GB
If the system still does not
operate properly after performing
the above measures, reset the
system as follows:
Use buttons on the system for this operation.
1
Press ?/1 to turn on the power.
2
Press INPUT SELECTOR, VOLUME –
and ?/1 at the same time.
“COLD RESET” appears and the system is
reset. AMP menu, sound field, etc., return to
the default settings.
Formats supported by this
system
Digital input formats supported by this system
are as follows.
* Linear PCM accepts sampling frequencies of no
more than 48 kHz.
Amplifier section
Power output (rated)
L / R:
80 W + 80 W
(at 4 ohms, 1 kHz, 1 %
THD)
Power output (reference) RMS output power
L / R: 100 W/ch (per channel at 4
ohms, 1 kHz, 10 % THD)
Subwoofer: 200 W (at 2 ohms, 100 Hz,
10 % THD)
Inputs (Analog)
TV
Sensitivity: 550 mV
Impedance: 33 kohms
Inputs (Digital)
TV, DIGITAL 1
Optical
DIGITAL 2 Coaxial
Specifications
Format Supported/Not supported
Dolby Digital a
DTS a
Linear PCM (2ch)* a
Linear PCM (5.1ch,
7.1ch)* (Only on
HDMI) a
Dolby Digital Plus ×
Dolby True HD ×
DTS-HD Ч