Status indicators – SpectraLink 8668 User Manual

Page 21

Advertising
background image

7

Inter-Tel

®

Model 8664/8665/8668 User Guide

FINDING Y

O

UR
W

A

Y

Status Indicators

To indicate various states, your endpoint uses icons and sounds. The table below lists
the endpoint’s status indicators and explains what each indicator means.

INDICATOR

STATUS

No Service

If the endpoint cannot receive or place calls, an alarm sounds and a message
is displayed. The in-service tone indicates when service has been re-estab-
lished.
If your receive the No Service message, you may be outside of the covered
area. Return to the coverage area. If the endpoint still does not function, note
the error message and contact your system administrator.
If the battery pack charge is low, the battery icon is displayed, and a soft beep
sounds. This indicates that the endpoint’s battery has 15-30 minutes of
charge remaining.

Battery Low

If the battery is critically low, the endpoint displays the Battery low status and
an alarm sounds while the endpoint is idle. The endpoint cannot be used until
the battery pack is charged.
If you have a voice mail or station message, the message icon is displayed.

NOTE:

This icon also indicates that the endpoint is in alpha mode when

inputting information text for DND messages (see

page 52

) and using the

directories (see

page 79

).

1

The line indicators are associated with line access keys. In the preceding dia-
gram, line 1 is active.
A left or right arrow is displayed when the screen can be toggled either left or
right to display more characters as described above.

Up and down arrows are displayed when the menu has additional options
above or below what is shown in the display area.
The battery icon indicates the amount of charge remaining in the battery
pack. The level indications are approximations of the remaining battery pack
life. They do not indicate equal amounts of battery pack Life. When only one
level remains, the battery pack needs to be charged.
The signal strength icon indicates the strength of the signal and can assist
the user in determining if the endpoint is moving out of range.

The download icon indicates that the endpoint is downloading code. This icon
only appears while the endpoint is running the over-the-air downloader. It
appears to the right of the Signal Strength icon in the same location as the
voice mail icon.

Melody

The Charge Complete melody is played when the endpoint is first powered
on after a completed charge.

Advertising
This manual is related to the following products: