SpectraLink 8668 - Manual (Page 24)

10 Inter-Tel ® Model 8664/8665/8668 User Guide
FINDING Y
O
U
R
W
A
Y
Function Button and Softkeys
Your endpoint has a (Function) button that provides access to frequently used
features. To access the function features, the endpoint must be in active mode (see
page 12 ). Pressing repeatedly scrolls through the softkey displays, and allows you
to view the sixteen available function features. To access a feature displayed on the
function menu, press the feature’s associated dialpad number or softkey. While the
four-line function display is showing, all button presses relate to the function options
only.
The following table lists the available function features and the default dialpad and
softkey buttons that are associated with the feature. For detailed instructions on how
to access the features listed, refer to the corresponding page number.
NOTE: Depending on how your telephone system is configured, you may need to use
the Feat softkey before you dial a feature code.
FCN
FCN
FUNCTION
DIALPAD
BUTTON
SOFTKEY PG.
Place a call on Hold. Hold 34
Access the Message menu or toggle between alpha/numeric mode. Msg 42
Mute the microphone, or backspace. Mute 41
Forward a call to another destination or voice mail, or forward space. Fwd 38
Transfer a call to another destination or voice mail. Xfer 36
Communicate with several different parties on one call. Conf 35
Enable and disable Do-Not-Disturb mode. DND 52
Redial an outside number or save the last number dialed. Redl 40
View or access System Speed-Dial numbers. SySp 70
View or access Station Speed-Dial numbers. StSp 67
Access additional features using feature codes. Feat N/A
Access programmable buttons for specific features. Pgm1vt 73
Pgm2
Pgm3
Pgm4
Pgm5
1
2
3
4
5
6
7
8
9
0
*
#