Programming remote messaging, Ng (see – SpectraLink 8668 User Manual
Page 78
64
Inter-Tel
®
Model 8664/8665/8668 User Guide
MOVING ON
Programming Remote Messaging
NOTE:
The Remote Messaging feature is available only if it is enabled for your mail-
box. Contact your voice mail administrator to see if this feature is enabled for your mail-
box.
ALSO:
The remote messaging feature is supported for voice mail messages only. If E-
Mail Reader is enabled for your mailbox, you cannot use remote messaging for e-mail
and fax messages.
With Remote Messaging, you can program voice mail to call you when your mailbox
receives new voice mail messages. Using a “cascade” (a series of up to nine telephone
numbers), voice mail will call each number until it successfully connects to a device
(e.g., pager, answering machine, etc.).
Because your mailbox can have a primary and an alternate cascade of numbers, you
can program a cascade to be used during specific days and times. For example, if you
want to be paged when you receive a voice mail message from 5-10 PM on weekdays,
you can set up a primary cascade. If you also want to receive pages for messages
marked “priority” on the weekends, you could set your alternate cascade for all day
on Saturdays and Sundays.
To set up remote messaging for voice mail messages (if enabled):
1.
Access your mailbox as described on
2.
Say “Personal” or press
to select the Personal Options Menu.
3.
Say “Remote” or press
. You have the following options:
• Say “Primary” or press
to set up a primary cascade.
• Say “Alternate” or press
to set up an alternate cascade.
4.
Say “Level” or press
and then say or enter the number (1-9) of the level
you wish to program. You then have the following options:
• To set up or change an extension or outside number:
– Say “Number” or press
.
– EITHER, say “Internal” or press
for an extension number.
OR, say “Outside” or press
for an outside number.
– Say or enter the number.
• To set up or change pager notification:
– Say “Pager” or press
.
– Say “Personal” or press
.
Say “Change” or press
to enable or disable the number.
4
5
1
2
1
2
1
2
1
2
1