Sanyo RL2500 - Manual (Page 131)

Using Voice-Activated Dialing
In addition to PCS Voice Command SM (see page 174), you can use a
Voice Dial tag to automatically dial a phone number in your Contacts
directory. Your phone can store up to 30 Voice Dial tags.
To use a Voice Dial tag to call a phone number:
With the Flip Open:
1. Press or briefly.
2. Follow the voice prompts and recite the entry’s Voice Dial tag
into your phone’s microphone.
With the Flip Closed:
1. Press and hold .
2. Follow the voice prompts and recite the entry’s Voice Dial tag.
Note: To use the Voice Dial function, you must have stored entries for Voice Dial
(see “Programming a Voice Dial Tag to Your Phone” on this page).
Programming a Voice Dial Tag to Your Phone
To program a voice dial tag:
1. Press to access the main menu.
2. Select Voice Services and press .
3. Select Voice Dial and press .
4. Select Program and press .
5. The phone will prompt you to say the name you want to
program. Wait for the beep and then say the name.
6. Respond to the prompt by repeating the name after the beep.
7. Enter or highlight the entry (name) in the Contacts list and
press .
8. Select the desired phone number and press . (The Display
shows “Voice Dial Recorded”.)
Note: Record Voice Dial tags in a quiet environment and without the aid of an
accessory (for example, a headset or hands-free car kit).
Section 2: Understanding Your PCS Phone
2I: Using Your Phone’s Voice Services 120