Making a pcs ready link call (group call) – Sanyo RL2500 User Manual

Page 41

Advertising
background image

5. When you are finished, press

.

Note:

When neither party has the floor during a PCS Ready Link call,

Floor is open.

” appears on the display. If no one takes the floor for 20 seconds,

the PCS Ready Link call ends automatically.

Tip:

If you press

or

during step 3 on the previous page, you can make a

standard voice call.

Making a PCS Ready Link Call (Group Call)

You can make a PCS Ready Link call to all members in a Group entry
in your PCS Ready Link List. You can communicate with up to five
members at a time.

To place a PCS Ready Link Group Call:

1. Press R-Link (left softkey) or press

to access the PCS Ready

Link List.

2. Press Go to (left softkey), highlight the list from which you want

to make a Group call (Co. Groups or Per. Groups), and press

.

3. Highlight the group you want to call, and press and hold

to

place the call and take the floor. (You will see R-Link calling... and
Connecting... followed by “You have floor.” Continue with the
PCS Ready Link call as described on the previous page.)

To display the group members details, press

, highlight

your desired group member, then press View (left softkey)
during step 3 above.

If one of the group members takes the floor, you will see
the member’s name and PCS Ready Link number on the
display (if applicable). The phone beeps if you press the
Ready Link button when another contact has the floor.

4. When the call is finished, press

.

Tip:

You can also make a 1-to-1 call by selecting a group member from the Group

list. From step 3 above, press

, select your desired group member, and press

and hold

.

Section 2: Understanding Your PCS Phone

2A: Your PCS Phone – The Basics

30

Advertising