Sanyo RL2500 - Manual (Page 27)

Important: To maximize performance when using your PCS Phone, extend the
antenna before a call and do not touch the antenna during a call (see page 180).
With the Flip Closed:
1. Make sure your phone is on.
2. Press and hold the Side Call key ( ) on the right side of
the phone.
3. You will see a message on the Sub LCD. Follow the system
prompts. (The call will be made in speakerphone mode, unless
you have a headset attached to the phone.)
ⅷ Redial to redial the last number you called.
ⅷ Voice Dial to use the Voice Dial function (see “Using Voice-
Activated Dialing” on page 120).
4. When you’re finished, press and hold .
Note: To use a Voice Dial, you must have stored entries for Voice Dial (see
“Programming a Voice Dial Tag to Your Phone” on page 120).
Answering Calls
With the Flip Open:
1. Make sure your phone is on. (If your phone is off, incoming calls
go to voicemail.)
2. Press or to answer an incoming call. (Depending on
your phone’s settings, you may also answer incoming calls by
pressing any digit.)
Correct Incorrect
Section 2: Understanding Your PCS Phone
2A: Your PCS Phone – The Basics 16