Sanyo RL2500 - Manual (Page 67)

Changing the Font Size
You can change the font size settings for the message notification and
the browser.
To change the font size:
1. Press to access the main menu.
2. Select Settings and press .
3. Select Display and press .
4. Select Font Size and press .
5. Select either Message or Browser and press .
6. Select your desired font size.
ⅷ Press Preview (right softkey) to display a font size example.
7. Press to set the selected font.
Tip: From the font example display, select your desired font displays by pressing
/ on the Navigation key.
Location Settings
Your PCS Phone is equipped with a Location feature for use in
connection with location-based services that may be available
in the future.
The Location feature allows the network to detect your position.
Turning Location off will hide your location from everyone
except 911.
Note: Even if the Location feature is enabled, no service may use your location
without your expressed permission.
To enable your phone’s Location feature:
1. Press to access the main menu.
2. Select Settings and press .
3. Select Location and press .
4. Press or OK (left softkey) or wait a few seconds until the
message scrolls down completely.
5. Select On and press .
ⅷ To deactivate this feature, select Off during step 5 above.
When the Location feature is on, your phone’s standby screen will
display the
icon. When Location is turned off, the icon will
display.
Section 2: Understanding Your PCS Phone
2B: Controlling Your Phone’s Settings 56