Sanyo VPC-CG9EX - Manual (Page 107)

English
100
NORMAL
/SHOO
T
IN
G
FACE CHASER
As you capture a still image, the face chaser detects the subject’s face, and
adjusts the brightness and focus in a way that produces a clear and bright
photo of the subject’s face.
1
Display the NORMAL Mode Shooting Menu (page 37), select “FACE
CHASER”, and press the SET button.
2
Select the desired setting, and press the SET button.
h This completes the face chaser setting.
HINT
When the face chaser is set to “ON”...
i Each face in the Shooting Screen is marked with a green frame.
i Faces that are in focus are marked with a double green frame.
i If you press the [
] button halfway, the frames marking the faces that
are in focus change to orange.
If you magnify an image that was captured with the face chaser function
enabled, the magnified image will center on the face(s).
i The scene select function setting automatically changes to =.
CAUTION
i The digital zoom is disabled.
i The face chaser function does not work when zooming in or out.
i The face chaser function may not work when the subject’s face in the
monitor is relatively small or appears dark.
-: The face chaser function is enabled.
.: The face chaser function is not enabled.