Sanyo VPC-CG9EX - Manual (Page 155)

O
P
TI
ON SET
TING
S
English
148
FORMATTING A CARD
A card must be formatted with this camera:
i After purchasing, when used for the first time, or
i If it was formatted using a personal computer or another digital camera.
The card cannot be formatted if the lock switch is set to the “LOCK” position.
Proceed with the format procedure after setting the lock switch to the
unlocked position.
1
Display the Option Setting Menu [3] (page 129).
2
Select “FORMAT”, and press the
SET button.
h In normal use, a full format is not
necessary. However, in case a
card error occurs even after
normal formatting, executing a full
format may resolve the problem.
FORMAT:
A normal formatting is executed.
FULL FORMAT:
The entire card is scanned and
formatted. (When there is little
battery power remaining, this setting
cannot be selected.)
3
Select the desired format option, and press the SET button.
h A confirmation screen appears.
OK
FULL FORMAT
FORMAT
FORMAT