Sanyo VPC-CG9EX - Manual (Page 174)

167
English
USING THE SOFTWARE
Obtaining the software
For Windows operating systems
1
Remove the card from the camera.
h The program to access the website is stored in your camera’s internal
memory. This program cannot be accessed while a card is installed in
the camera.
2
Start your computer, and use the supplied dedicated USB interface
cable to connect your camera to the computer.
h Connect the camera’s USB/AV terminal to the computer’s USB
connector.
3
Turn on your camera (page 29).
h The USB Connection Screen appears on the camera’s monitor.
OK CANCEL
USB CONNECTION
CANCEL
PRINTER
COMPUTER
To USB connector
on the computer
Supplied dedicated
USB interface cable
To the USB/AV terminal on
the camera
SET button