Sanyo VPC-CG9EX - Manual (Page 167)

CONNEC
T
ING T
O
A COMPUT
E
R
English
160
USING AS A CARD READER
For Windows Vista/XP users
Mounting your camera
1
Set the camera to the card reader mode (page 158).
h The message [Found New Hardware] appears in the task tray,
showing that the camera is recognized as a drive.
h The card is recognized (mounted) as a disk, and the [XACTI (E:)] icon
appears in the [My Computer] window.
* The drive name (E:) may be different on your computer.
2
Select an action.
h If the [XACTI (E:)] window appears automatically, select the desired
procedure from the window.
Dismounting the camera
CAUTION
i To disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
1
Left-click on the icon for safely removing hardware in the task tray.
h A list appears showing the devices connected to the computer’s USB
connector.
<Windows Vista>
h Close the window.
2
Left-click on the camera drive (E:).
h The camera can now be disconnected.
* The drive name (E:) may be different on your computer.