Sanyo VPC-CG9EX - Manual (Page 98)

91
English
MOTION COMPENSATION (IMAGE STABILIZER)
HINT
If the motion compensation does not seem to be working...
i Due to the mechanical characteristics of this function, it may not be
possible for the camera to compensate for violent motion.
i If the digital zoom (page 67) is being used, the large magnification factor
may make it difficult for the motion compensation function to work correctly.
i When using a tripod or other means to stabilize the camera during
shooting, please turn the motion compensation function off ]. If the
motion compensation function is enabled when it is not actually needed, it
may result in an image that appears unnatural.
When motion compensation is enabled,
i The following icons are shown on the monitor:
Can’t set the photo stabilizer setting?
i The photo stabilizer is automatically turned off after any of the following
operations:
h Setting the flash mode to forced flash
h Setting the shooting mode to the sequential shots mode
h Setting flicker reduction (page 139) to “ON”
h Setting the scene select function to the night view portrait, fireworks, or
lamp mode
The photo stabilizer isn’t working?
i The photo stabilizer does not work when you are capturing a still image
while recording a video clip.
i The photo stabilizer does not work when the ISO sensitivity is set to - or
higher.
Limitations when the photo stabilizer is ON
i The time it takes for the camera to save an image may be slightly longer
when the photo stabilizer is set to ON.
TV-SHQ
00:04:30
Setting Movie stabilizer Photo stabilizer
Movie stabilizer
+
Photo stabilizer
Icon
display
Movie field of
view display
Photo field of
view display