Sampo DVE-560 - Manual (Page 18)

16
Center Delay
This unit supports the center time delay range of 0 to 5 ms
in 1ms steps.
Rear Delay
This unit supports the surround time delay range of 0 to
15 ms in 3ms steps.
p Digital Audio Out
This setting concerns the audio output format from the
unit’s optical/coaxial digital audio output terminal.
Disc Audio encoding format Digital output format
DVD Dolby Digital
(AC-3)
Bit stream(2-5.1ch) or
48kHz/2ch LPCM
(up to 20bits)
DTS Bit stream or
OFF
Linear PCM (48/
96kHz up to 24bits)
LPCM up to 48kHz/20bit
or up to 96kHz
MPEG 2ch LPCM (16bits)
Video
CD
MPEG I LPCM
CD Linear PCM LPCM
Where the digital output format is dedicated by this
DIGITAL AUDIO OUT setting.
In the LPCM setting,
1 “48K” means “the maximum output sampling rate is
48KHz”. Therefore, when the encoding sampling rate
is 96KHz, the audio will be converted to 48kHz.
1 “96KHz” means “ the maximum output sampling rate
is 96KHz”. There is no converting process.
p Preferences
Here, you can set the default audio/subtitle/disc language,
and the parental level for a DVD disc. This setting is only
available when the DVD player is in the STOP mode by
pressing the STOP button twice.
SPEAKER SETUP PAGE –
CNTR SPEAKER
REAR SPEAKER
SUBWOOFER
CNTR DELAY >>
REAR DELAY
3MAIN PAGE
SET CENTER DELAY
SPEAKER SETUP PAGE –
CNTR SPEAKER
REAR SPEAKER
SUBWOOFER
CNTR DELAY
REAR DELAY >>
3MAIN PAGE
SET REAR DELAY
-- DIGITAL AUDIO OUT –
AC-3 >>
BITSTREEM
DTS LPCM
MPEG
LPCM
3MAIN PAGE
SET AC-3 DIGITAL OUT
-- PREFERENCES PAGE –
AUDIO >>
ENGLISH
SUBTITLE FRENCH
DISC MENU SPANISH
PARENTAL CHINES
PASSWORD JAPANES
DEFAULTS
3MAIN PAGE
PREFERRED AUDIO LANGUAGE