Sampo DVE-560 - Manual (Page 25)

23
Start/Cancel the program playback
1 Press the
PLAY button to start the program
playback in order that you program.
1 Press the
STOP button to cancel the program
playback and the program order is reset.
1 During the program playback, the tracks you program
will be played back in circles and the NEXT button
and the PREV button can also be used for
operation.
p MARK
This DVD player supports 5 memory points for you to
store markers.
Store makers
Press the MARK button during playback and the mark
menu will be shown on screen. Press the MARK button
again to exit from the mark menu .
Where the digit means there is a marker stored in this
memory, and “+” means no marker .
1 Press the 4 or 3 button to select a “+” position.
1 During playback, press the
ENTER button to mark
the current time in the memory and, then, the position
will be numbered.
Playback/Cancel marker
1 When you press the
3 or 4 button to select a
numbered position, the mark menu becomes
1 Press the
ENTER button to playback from the
marker and, then, the mark menu will be cleared
automatically.
1 Press the
CLEAR button to clear a marker and,
then, the mark menu becomes
MARK 1 2 + + +
PRESS ENTER TO SETUP MEMORY
MARK 1 2 3 + +
PRESS ENTER TO SETUP MEMORY
MARK 1 2 + + +
PRESS ENTER TO SETUP MEMORY
MARK 1 2 3 + +
PRESS ENTER TO SETUP MEMORY
PRESS CLEAR TO CANCEL
PROGRAM P06:03