Siemens CX203isdn - Manual (Page 30)

29
Functions during a call
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / during.fm / 14.11.2005
Make a call to the internal user:
Toggling
Precondition: You have established an enquiry call (page 27 and page 28).
There is both an active call (the one established with an enquiry call) and a held call (the
first). You can speak to both callers one at a time.
Use
s t to switch between the two callers.
An external party hears the set-up waiting melody in a connection on hold (page 105)
when the connection is on hold internally (page 104). An internal user in a connection
on hold does not hear a waiting melody.
Ending an enquiry call/toggling
either ...
~
Enter the number of the internal user you want.
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRR] LIST Press the display key.
s
INT11: Int.11 Select the required internal number,
e.g. INT11: Int.11, and confirm.
The connection to the internal user is established.
The internal user dialled is busy:
[RRRRRRRRRRRRRRRRRRRRRRRRRR] BACK
Press the display key to return to the external party.
The internal user has answered:
either ... Toggle (page 29):
s t
Switch between call parties using display keys.
or ... Conference call (page 30):
[RRRRRRRRRRRRRRRRRRRRRRRRRR] CONF. Press the display key to establish conference
switching.
or ...
Transfer the call (page 31).
OK
either ... End the call that is currently active:
i
Open the menu.
s
End
Select the menu item and confirm. You return to the
waiting caller.
or ...
a
Replace the receiver (return to idle status).
The active connection is ended. You will
automatically be called again by the person on hold.
OK