Sony DVP-NC650V - Manual (Page 32)

32
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select “QUICK” under “SETUP” in the Control Menu (page 77).
Enjoying the surround sound effects
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in pages 22 to 26
(
through ). Each of these are the default settings and do not need to be adjusted when
you first connect the player. Refer to page 77 for using the Setup Display.
Audio Connection (pages 21 to 26)
No additional settings are needed.
• If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page
83).
• Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect an amplifier (receiver) that
conforms to 96 kHz digital audio input (page 85).
• If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page
83).
Item You select Page
DISTANCE
BALANCE
LEVEL Set according to the connected
speakers 86
Item You select Page
DOWNMIX DOLBY SURROUND 84
DIGITAL OUT ON 84
Item You select Page
DOWNMIX DOLBY SURROUND 84
B D
A
B-1
B-2 C-2 D-2
C-1 D-1